#Ge networx nx 8e manual how to#
#Ge networx nx 8e manual free#

This zone will automatically bypass when enabled in Segment 1 of Location 23. If a 'Cross Zone' is being timed it will create an instant alarm. If a 'Cross Zone' is not being timed it will start a 'Cross Zone' timer. It is delayed during entry and exit delay times.

INTERIOR FOLLOWER WITH 'CROSS ZONE' ENABLED - This zone will be instant when the system is armed and no entry or exit delay is being timed. Keyswitch arming will report as user #99. KEYSWITCH ZONE - This zone type will arm and disarm the partition or partitions of the control panel that it resides in each time the zone is shorted. The lack of a trip during exit delay will enable the Automatic Bypass or Instant mode if so programmed.Ģ4-HOUR SILENT SUPERVISED- Creates an instant silent alarm regardless of the armed state of the control panel. It will also rapidly flash the Fire LED indicating a trouble if the zone is open.ĮNTRY/EXIT DELAY 2- A trip will start entry delay 2. It will not display on the keypad.įIRE - This zone will light the Fire LED and sound the temporal siren each time the zone is shorted. INSTANT - This zone creates an instant alarm whenever it is tripped and the Armed LED is on.Ģ4-HOUR SILENT - Creates an instant silent alarm regardless of the armed state of the control panel. This zone will automatically bypass if enabled in Segment 1 of Location 23. INTERIOR FOLLOWER WITH AUTO- BYPASS ENABLED - This zone will be instant when the system is armed and no entry or exit delay is being timed. This zone will not automatically bypass even if enabled in Segment 1 of Location 23. The lack of a trip during exit delay will enable the Automatic Bypass or Instant mode if so programmed.įOLLOWER WITH AUTO- BYPASS DISABLED - This zone will be instant when the system is armed and no entry or exit delays are being timed. These zone types can be customized by programming locations 110-149.ĭAY ZONE - Instant when system is armed trouble zone when system is disarmed.Ģ4-HOUR AUDIBLE - Creates an instant yelping siren alarm regardless of the armed state of the control panel.ĮNTRY/EXIT DELAY 1- A trip will start entry delay 1. Zone types # 17 - 20 can be usedįor wireless or hardwired zones using European double EOL configuration. We are usually able to takeover just about any kind of security system, including GE Interlogix NetworX NX-8E panels, so don’t hesitate to give us a ring.Zones can be programmed to be one of twenty different zone types (configurations).

#Ge networx nx 8e manual free#

If you are looking to reduce your monthly alarm monitoring rates for your home or business make sure to contact GeoArm Security at 1-87 for your free consultation. After that you, you’ll need to power-cycle the module if you want to do more phone tests, or you’ll need to wait a day. Note: You can only do the cell test 6 times in a 24 hour period. Before trying to send alarm signals to your alarm monitoring company, the cellular radio must first be registered before performing a cellular communicator signal strength test. The GE Interlogix NX-8E security system is compatible with NX-592E cellular communicators. It ensures that will receive the sensors list and any other information required for proper signaling. The cellular test is also used by to set the module's parameters the first time the module is powered up. If the system is reporting to an alarm monitoring company, wait for a minute than check with the central alarm monitoring station to see if the cellular test signal was received correctly. L4 should be blinking on for 2 seconds and off for 2 seconds. 元 will blink once briefly as soon as you press *44. To monitor if it has sent you can check the cell radio status on it's LEDs 元 and L4: The NetworX NX-8E panel will not show any indication that the cell test has been sent. To avoid triggering the siren when performing the phone test, make sure Bit 6 is OFF. Note: if Location 37, Segment 2, Bit 6 is set, performing the phone test will trigger the local siren. To perform a cellular test on a GE Interlogix NetworX NX-8E security system press *44 while the system is disarmed (Make sure that panel’s Location is 37, Segment is 2 and Bit is set to 7 if these settings are not inputted the *44 cell test will not work correctly.)

#Ge networx nx 8e manual how to#

Solution home GE Interlogix GE Interlogix NetworX NX-8E FAQ's GE Interlogix NetworX NX-8E: How to Perform a Cellular Test?